The use of Power unit hydraulic oil Due to various types of hydraulic system failure occur more than 80% of the problems are caused by hydraulic oil, so the correct use of hydraulic oil to ensure the system's reliability is very important. The product must use hydraulic oil to meet the national standards, prohibitedthe

The hydraulic cylinder is divided into single and double acting cylinder, single acting cylinder starting action by hydraulic propulsion, reset action by load gravity or spring to achieve, the single hydraulic cylinder with an oil inlet and an exhaust port; and the expansion and contraction of the double acting cylinder are dependent on hydraulic

Hydraulic power unit motor has both kinds:AC motor and DC motor. Usually AC motor has both kinds motors,three-phase motor and single-phase motor,it is according to the user’s need to choose,which was divided into ordinary AC motor and and special oil pump motor.Ordinary AC motor can be achieve the long time work duty, and special

Hydraulic power Unit Installation has two ways,that is vertical and horizontal installation,as shown in figure;   there are devices placed inside the built-in and external devices on the two kinds depending on the external parts of the installation, built-in dimensions of the power unit there are specific requirements, if the mounting space is difficult,

In order to use the product to achieve the functionality required by the user, when ordering, users must offer products relevant technical requirements and parameters. Hydraulic Cylinder parameters - including the cylinder bore and piston rod diameter, stroke, cylinder quantity; - it is a double action cylinder or single cylinder; - this hydraulic power unit